General Specifications

SERVICE SPECIFICATIONS
Cylinder Head Flatness Of Gasket Surface:
Standard Value 0.05 mm (0.0020 inch)
Limit 0.2 mm (0.008 inch)
Cylinder Head Grinding Limit Of Gasket Surface:
Includes/Combined With Cylinder Block Grinding 0.2 mm (0.008 inch)
Cylinder Head Overall Height 84 mm (3.31 inch)
Cylinder Head Oversize Valve Guide Hole (Both Intake and Exhaust):
0.05 13.05 - 13.07 mm (0.5138 - 0.5147 inch)
0.25 13.25 - 13.27 mm (0.5217 - 0.5224 inch)
0.50 13.50 - 13.52 mm (0.5315 - 0.5323 inch)
Cylinder Head Oversize Intake Valve Seat Ring Hole:
0.3 44.30 - 44.33 mm (1.7441 - 1.7453 inch)
0.6 44.60 - 44.63 mm (1.7559 - 1.7571 inch)
Cylinder Head Oversize Exhaust Valve Seat Ring Hole:
0.3 38.30 - 38.33 mm (1.5079 - 1.5091 inch)
0.6 38.60 - 38.63 mm (1.5197 - 1.5209 inch)

TORQUE SPECIFICATIONS
Cylinder Head Bolt 108 Nm (80 ft. lbs.)