Replacement

Post Installation Operation
- Under Cover Side Panel Removal
- Speed Control Assembly Removal
(Refer to - Auto-Cruise Control System)

Post Installation Operation
- Speed Control Assembly Installation
(Refer to - Auto-Cruise Control System)
- Drive Belt Tension Adjustment
(Refer to Maintenance Service)
- Under Cover Side Panel Installation
(Refer to - Under Cover.)

Generator - Removal And Installation:

Removal
To remove follow the steps listed in the image and note the following:

Generator Removal:

Step 3: Generator Removal
1. Remove the oil pressure switch terminal
2. Take out the generator from the underside of the vehicle.


Installation
To install reverse the steps listed in the image.