Input Shaft, M/T

SERVICE SPECIFICATIONS
End Play
Front Bearing 0.01-0.12 mm (.0004-.0047 inch)
Rear Bearing 0-0.09 mm (0-.0035 inch)

SNAP RINGS AND SPACERS FOR ADJUSTMENT
Snap Ring (For Adjustment Of Input Shaft Front Bearing End Play)
Part No.:
MD706537 * (None) 2.24 mm (.0882 inch)
MD706538 * (Blue) 2.31 mm (.0909 inch)
MD706539 * (Brown) 2.38 mm (.0937 inch)

Snap Ring (For Adjustment Of Input Shaft Rear Bearing End Play)
Part No.:
MD723276 * (Blue) 1.40 mm (.0551 inch)
MD730889 * (Purple) 1.45 mm (.0571 inch)
MD723277 * (Red) 1.50 mm (.0591 inch)
MD730890 * (White) 1.55 mm (.0610 inch)
MD723278 * (Yellow) 1.60 mm (.0630 inch)
MD730891 * (Brown) 1.65 mm (.0650 inch)
MD723279 * (Green) 1.70 mm (.0670 inch)
MD730892 * (Orange) 1.75 mm (.0689 inch)

NOTE: * ( ) Identification Symbol.

TIGHTENING SPECIFICATIONS
Lock Nut 150 Nm (109 ft. lbs.)