Main Bearing Clearance, Standards and Limits

DIMENSIONS
Bearing Cap Bolt Shank Length: 71.1 mm (2.80 inch)
Journal O.D.: 57 mm (2.24 inch)
Journal/Pin Out-Of-Round And Taper: 0.01 mm (0.0004 inch) Or Less
Pin O.D.: 45 mm (1.77 inch)
Pin Oil Clearance
Standard Value: 0.02 - 0.05 mm (0.0008 - 0.0020 inch)
Limit: 0.1 mm (0.004 inch)