Input Shaft, M/T

SERVICE SPECIFICATIONS
End Play
Shaft 0-0.05 mm (0-.0020 inch)
Front Bearing 0.01-0.12 mm (.0004-.0047 inch)
Rear Bearing 0-0.09 mm (0-.0035 inch)

SNAP RINGS AND SPACERS FOR ADJUSTMENT
Snap Ring (For Adjustment Of Input Shaft Front Bearing End Play)
Part No.:
MD706537 * (None) 2.24 mm (.0882 inch)
MD706538 * (Blue) 2.31 mm (.0909 inch)
MD706539 * (Brown) 2.38 mm (.0937 inch)

Snap Ring (For Adjustment Of Input Shaft Rear Bearing End Play)
Part No.:
MD723276 * (Blue) 1.40 mm (.0551 inch)
MD730889 * (Purple) 1.45 mm (.0571 inch)
MD723277 * (Red) 1.50 mm (.0591 inch)
MD730890 * (White) 1.55 mm (.0610 inch)
MD723278 * (Yellow) 1.60 mm (.0630 inch)
MD730891 * (Brown) 1.65 mm (.0650 inch)
MD723279 * (Green) 1.70 mm (.0670 inch)
MD730892 * (Orange) 1.75 mm (.0689 inch)

Spacer (For Adjustment Of Input Shaft End Play)
Part No.:
MD727661 * (80) 0.80 mm (.0315 inch)
MD720937 * (83) 0.83 mm (.0327 inch)
MD720938 * (86) 0.86 mm (.0338 inch)
MD720939 * (89) 0.89 mm (.0350 inch)
MD720940 * (92) 0.92 mm (.0362 inch)
MD720941 * (95) 0.95 mm (.0374 inch)
MD720942 * (98) 0.98 mm (.0386 inch)
MD720943 * (01) 1.01 mm (.0398 inch)
MD720944 * (O4) 1.04 mm (.0409 inch)
MD720945 * (07) 1.07 mm (.0421 inch)
MD710454 * (J) 1.10 mm (.0433 inch)
MD700270 * (D) 1.13 mm (.0445 inch)
MD710455 * (K) 1.16 mm (.0457 inch)
MD710456 * (L) 1.19 mm (.0468 inch)
MD700271 * (G) 1.22 mm (.0480 inch)
MD710457 * (M) 1.25 mm (.0492 inch)
MD710458 * (N) 1.28 mm (.0504 inch)
MD706574 * (E) 1.31 mm (.0561 inch)
MD710459 * (O) 1.34 mm (.0527 inch)
MD710460 * (P) 1.37 mm (.0539 inch)
MD706573 * (None) 1.40 mm (.0551 inch)
MD710461 * (Q) 1.43 mm (.0563 inch)
MD710462 * (R) 1.46 mm (.0575 inch)

NOTE: * ( ) Identification Symbol.

TIGHTENING SPECIFICATIONS
Lock Nut 150 Nm (109 ft. lbs.)