System Specifications

LUBRICANTS
Brake Fluid DOT 3 or DOT 4 Used For Clutch Fluid, Clutch Release Cylinder Inner Surface and Piston and Cup Surface.

Rubber Grease Used For Push Rod Assembly & Boot.

MITSUBISHI Genuine Grease Part No. 010011 or Equivalent Used For Release Cylinder Push Rod, Release Fork Fulcrum, Clutch Release Fork To Release Cylinder Contact Surface, Clutch Release Bearing Inside, Clutch Disc Spline and Clutch Release Bearing To Release Fork Contact Surface.

Brake Grease SAE J310, NLGI No. 1 Used For Clutch Pedal Shaft, Bushings and End of The Pedal, Clutch Master Cylinder Push Rod, Clevis Pin and Washer and Clutch Release Cylinder Clevis Pin.