Vehicle Damage Warnings

If the SRS components are to be removed or replaced as a result of maintenance, troubleshooting, etc. follow each procedure. (SRS Air Bag Control Unit: Air Bag Modules and Clock Spring:)

CAUTION:
1. SRS components should not be subjected to heat over 93°C (200°F), so remove SRS air bag control unit, air bag modules and clock spring before drying or baking the vehicle after painting. Recheck SRS system operability after re-installing them.
2. If the SRS components are removed for the purpose of inspection, sheet metal repair, painting, etc. they should be stored in a clean, dry place until they are reinstalled.