Fuel Tank: Service and Repair

AWD:

REMOVAL AND INSTALLATION




INSTALLATION SERVICE POINT
>A< CAP INSTALLATION
Use the special tool to tighten the cap to the specified torque so that the marks on the fuel tank and the fuel gauge unit and pump assembly (or the fuel gauge unit and pipe assembly) are aligned.

CAUTION
Make sure that the fuel gauge unit and pump assembly (or the fuel gauge unit and pipe assembly) does not turn together with the cap when tightening the cap. If the mating marks are not aligned, the position of the float will not be correct and the fuel gauge indicator light and the fuel level gauge will not operate properly.

>B< FUEL TANK DIFFERENTIAL PRESSURE SENSOR INSTALLATION

CAUTION: When removing or installing the sensor, take care not to damage sealing.