Engine Torque Strut: Service and Repair

REMOVAL
Follow removal steps outlined in illustration.

Removal Service Point






Centermember Assembly Removal.
1. Set the special tool to the vehicle to support the engine assembly.
2. Remove the centermember assembly.

INSTALLATION
Installation in reverse order as removal.

Installation Service Point






Front Roll Stopper Bracket Assembly Installation.
If the dimension shown in the illustration is outside the standard value when the weight of the engine is on the body, replace the front roll stopper bracket assembly.

Standard value (A): 43 ± 3 mm (1.69 ± 0.12 inch)

INSPECTION
- Check each insulator for cracks or damage.
- Check each bracket for deformation or damage.