Removal and Installation

Master Cylinder And Brake Booster:

1. Drain brake fluid and move the clutch fluid reservoir bracket (M/T).
2. Remove the center member assembly mounting bolts and engine mount bracket.
3. Remove the air conditioning compressor mounting bolts and the high pressure hose clamp.
4. Remove the power steering pressure hose, pipe and return pipe clamp mounting bolts.
5. Remove the brake pipe connection.
6. Remove the master cylinder assembly.
7. Reverse procedure to install, noting the following:
- Bleed hydraulic system. Refer to "Bleeding Brake System."
- Ensure proper adjustment/clearance between brake booster push rod and primary piston. Adjustments