Differential, Automatic Transaxle

SERVICE SPECIFICATIONS
Case Preload 0.075 -0.135 mm (.00295-.00531 inch)
Gear And Pinion Backlash 0.025 -0.150 mm (.00098-.00591 inch)

SPACER (FOR ADJUSTMENT OF DIFFERENTIAL CASE PRELOAD)
Thickness
Part No.
MD754475 * (71) 0.71 mm (.0280 inch)
MD727660 * (74) 0.74 mm (.0291 inch)
MD754476 * (77) 0.77 mm (.0303 inch)
MD727661 * (80) 0.80 mm (.0315 inch)
MD720937 * (83) 0.83 mm (.0327 inch)
MD720938 * (86) 0.86 mm (.0339 inch)
MD720939 * (89) 0.89 mm (.0350 inch)
MD720940 * (92) 0.92 mm (.0362 inch)
MD720941 * (95) 0.95 mm (.0374 inch)
MD720942 * (98) 0.98 mm (.0386 inch)
MD720943 * (01) 1.01 mm (.0398 inch)
MD720944 * (04) 1.04 mm (.0409 inch)
MD720945 * (07) 1.07 mm (.0421 inch)
MD710454 * (J) 1.10 mm (.0433 inch)
MD700270 * (D) 1.13 mm (.0445 inch)
MD710455 * (K) 1.16 mm (.0457 inch)
MD710456 * (L) 1.19 mm (.0469 inch)
MD700271 * (G) 1.22 mm (.0480 inch)
MD710457 * (M) 1.25 mm (.0492 inch)
MD710458 * (N) 1.28 mm (.0504 inch)
MD706574 * (E) 1.31 mm (.0516 inch)
MD710459 * (O) 1.34 mm (.0528 inch)
MD710460 * (P) 1.37 mm (.0539 inch)

NOTE: * ( ) Identification Symbol.

SPACER (FOR ADJUSTMENT OF DIFFERENTIAL GEAR AND PINION BACKLASH)
Thickness
Part No.
MD722986 0.75-0.82 mm (.0295-.0323 inch)
MD722985 0.83-0.92 mm (.0327-.0362 inch)
MD722984 0.93-1.00 mm (.0366-.0394 inch)
MD722982 1.01-1.08 mm (.0398-.0425 inch)
MD722983 1.09-1.16 mm (.0429-.0457 inch)

TIGHTENING SPECIFICATIONS
Cover Bolt 11 Nm (8 ft. lbs.)
Drive Gear Bolt 135 Nm (98 ft. lbs.)
Front Bearing Cap Bolt 7O Nm (51 ft. lbs.)
Rear Bearing Retainer Bolt 35 Nm (26 ft. lbs.)