Shifter Rails Overhaul

1. Disassemble the transaxle case using the procedures provided in this group.
2. Remove shifter rails from the gear train.
3. To service the 5/R shift rail, remove the C-clip retaining the reverse shift lever arm. Remove the 5th shift fork roll pin and remove the 5th shift fork.
Remove the shift lug roll pin and remove the shift lug. Replace parts as necessary.
4. To service the 3/4 shift rail, remove the roll pin retaining the 3/4 shift fork. Remove the shift fork. Remove the shift lug roll pin and remove shift lug. Replace parts as necessary.
5. To service the 1/2 shift rail, remove the roll pin retaining the 1/2 shift fork. Remove the shift fork and replace parts as necessary.