Turn Signal Switch: Service and Repair

1. Remove steering wheel as outlined under Steering Wheel.
2. Remove knee protector as follows:
a. Remove hood lock handle.
b. Remove rheostat and switch garnish.

Fig. 16 Column Switch Replacement:

c. Remove knee protector screws and knee protector, Fig. 16.

Fig. 12 Upper & Lower Column Cover Removal:

3. Remove upper and lower steering column cover screws, then remove covers ensuring not to break cover grippers, Fig. 12.
4. Remove lap cooler and foot shower duct.
5. Remove right and left column switches.
6. Reverse procedure to install.