Front Suspension

Prior to performing any service operations listed in this section, consult "Technical Service Bulletins" Section for related information.

Fig. 2 Strut Replacement:

When replacing strut assembly, refer to Fig. 2.
1. Raise and support vehicle, then remove front wheels.
2. Remove bolts securing brake hose and tube bracket. Do not pry brake hose and tube away when removing it.
3. Disconnect strut assembly from knuckle arm.
4. Remove strut insulator to strut house panel mounting nuts.
5. Remove strut assembly.
6. Reverse procedure to install. Tighten all bolts and nuts to specifications.