Warranty Information

Submit as Recall Claim type "C", Menu option "E-5" on your Diamond Network System.

Required operation: Inspect, and if required, replace the end clutch oil seal.

Eclipse and Galant (DSM built - VIN id = 4A) Required Operation
Labor Operation Code: C9409FXX

Time Allowance: 1.3 hr. for repair, 0.1 hr. for inspection only.

A sample required work claim is shown.

Diamante, Expo, Expo LRV, Mirage and 300OGT (MMC built - VIN id = JA) Required Operation
Labor Operation Code: C9408AXX

Time Allowance: 1.0 hr. for Expo, Expo LRV and Mirage repair, 1.3 hr. for 300OGT and Diamante repair, 0.1 hr. for Expo, Expo LRV, Mirage, 300OGT and Diamante inspection only

A sample required work claim is shown. (Mirage, Expo and Expo LRV). (300OGT and Diamante).

Note:
The "O" in the above labor codes is the number ZERO.

Supplemental Warranty Information

If the transaxle requires any additional repairs or parts (for example: an end clutch assembly replacement), file a standard warranty claim in addition to a Service Campaign claim using the following information:

Claim Type = "W"
Causal Code = 99D990
Position Code = 233230
Labor operation code = 23301000

NO additional labor time is allowed to be claimed for an end clutch assembly replacement.