Tightening Specifications

COMPONENT Torque/Ft. Lbs.
Back-up Lamp Switch 22-25
Bearing Retainer Bolt 11-15
Bellhousing Cover 7-9
Bleeder Plug 7-9
Brake Booster Installation Nut 7-11
Clutch Cover Assembly 11-16
Clutch Pedal Bracket 6-9
Clutch Pedal Support Bracket 6-9
Clutch Pedal To Support Bracket 14-8
Clutch Release Cylinder 11-16
Clutch Tube Flare Nut 9-12
Drain Plug 22-25
Flywheel Bolts 94-191
Fulcrum 25-30
Input Shaft Locknut 102-115
Lower Arm Ball Joint To Knuckle 43-52
Poppet Plug 43-52
Rear Housing Cover Bolt 11-15
Restrict Ball Assembly 11-15
Shift And Select Cable To Transaxle 11-16
Speedometer Sleeve Bolt 20-25
Starter Motor Mounting Bolt 20-25
Stop Lamp Switch 7-11
Stopper Bracket Bolt 11-15
Tie Rod End To Knuckle 17-25
Transaxle Bracket 43-58
Transaxle Case Tightening Bolt 26-30
Transaxle Mounting Bolt (0.47 inch) 32-39
Transaxle Mounting Bolt (0.40 inch) 22-25
Transaxle Mounting Bolt (0.31 inch) 7-9
Transfer Assembly Mounting Bolt 40-43