Removal

Fig. 88 Water Pump Assembly Removal (Part 1 Of 2):

Fig. 88 Water Pump Assembly Removal (Part 2 Of 2):

Remove water pump in numbered sequence, Fig. 88, noting the following:

1. Remove lower engine compartment cover.
2. Drain engine coolant as follows:
a. Place instrument panel temperature control lever in Hot position.
b. Carefully remove radiator cap.
c. Remove radiator drain plug.

3. To remove engine mount bracket, slightly raise and support engine, removing weight of engine from mount.
4. Remove automatic tensioner, timing belt and timing belt B as outlined under Timing Belt.