Suspension Spring ( Coil / Leaf ): Service and Repair

Fig. 2 Coil Spring Rear Suspension:

1. Raise rear of vehicle, then position jackstands under frame side rails to support body.
2. Remove wheel and tire assembly, then remove rear brake drum assembly.
3. Disconnect muffler from exhaust pipe, then remove muffler assembly.
4. Position a jack under suspension arm, then raise suspension arm slightly.
5. Disconnect shock absorber from upper and lower mounting, Fig. 2.
6. Carefully lower jack to relieve spring tension, then remove coil spring, noting position of upper and lower spring seats.
7. Reverse procedure to install. After completing installation, bleed brake system, then adjust rear wheel bearings.