Automatic Transmission/Transaxle: Technical Service Bulletins

• Customer Interest
  • Interior - Drivetrain Vibration
• All Technical Service Bulletins
  • A/T - Choosing the Right ATF
  • A/T - Math Part II
  • A/T - Twenty Steps To Successful Repairs
  • A/T - Math Formulas Part I
    • Overview
    • Shift Speed and Pressure
    • Speedometer Ratios
  • A/T - Front Bushing Wear
  • A/T - Slipping or No-Shift/Metal Sealing Rings
  • A/T - Drive Axle and Wheel Lug Nut Torque Specifications
  • A/T - Failsafe Modes
  • A/T - Intermittent Electrical Problems
  • A/T - How To Use A Pressure Gauge
  • A/T - Engine Vacuum Testing
  • A/T - New End-Play and Preload Measurement
  • Transmission - Identification Codes
  • A/T - Idle Switch Revision
  • A/T, Remanufactured - Program Update
  • A/T - Remanufacturing Program.
    • Overview
    • Warranty/Non Warranty Repair
    • Remanufactured A/T Replacement Procedures
    • Remanufactured A/T Limited Warranty
    • Parts/Warranty Information
  • A/T - Gear Noise Reduction
  • Interior - Drivetrain Vibration
  • A/T - Differential Bearing Cap Bolt Manual Update
  • A/T Oil Cooler - Backflush Alternative
  • A/T - Perform Cooler Flow Test When Replacing A/T
  • A/T - Solenoid Harness Routing, Manual Revision
  • A/T - Shift Control Solenoid Valve Revision
  • Brakes - Pedal Height Adjustment Manual Revision
  • A/T End Clutch - Improved
  • Automatic Transaxle - Improved Rear Clutch
  • A/T - Valve Body Repair Manual Corrections
  • A/T - Differential Bearing Spacers, Manual Update