Computers and Control Systems: Specifications

Accelerator cable free play
M/T 0.04 - 0.08 in. (1 - 2 mm)
A/T 0.12 - 0.20 in. (3 - 5 mm)

Firing order 1-3-4-2

Idle speed [1] 700 ± 100 RPM

Idle speed W/ AC ON [1] 850 RPM

Idle mixture [2]

TIGHTENING TORQUE SPECIFICATIONS:

Accelerator cable adjustment bolts 3 - 4 ft.lbs. (4 - 6 Nm)
Air bypass valve 11 - 16 ft.lbs. (15 - 22 Nm)
Air hoses (hose clamps) 3 ft.lbs. (4 Nm)
Air pipe mounting bolts 9 - 11 ft.lbs. (12 - 15 Nm)
Drain plug 11 - 14 ft.lbs. (15 - 20 Nm)
Fuel pressure regulator installation bolts 6 - 7 ft.lbs. (8 - 10 Nm)
Fuel rail installation bolts 7 - 9 ft.lbs. (10 - 13 Nm)
Ground plate mounting screws 1.5 - 2 ft.lbs. (2 - 3 Nm)
High pressure hose to fuel filter 18 - 25 ft.lbs. (25 - 35 Nm)
High pressure hose to fuel rail 3 - 4 ft.lbs. (4 - 6 Nm)
High pressure hose to fuel pump 22 - 29 ft.lbs. (30 - 40 Nm)
Intercooler to body 9 - 11 ft.lbs. (12 - 15 Nm)
Main pipe to fuel filter 22 - 29 ft.lbs. (30 - 40 Nm)
Main pipe to high pressure hose (2WD) 18 - 25 ft.lbs. (25 - 35 Nm)
Main pipe to high pressure hose (4WD) 22 - 29 ft.lbs. (30 - 40 Nm)
Oil pipe to engine 10 - 14 ft.lbs. (14 - 19 Nm)
Oil pipe to turbocharger 20 - 25 ft.lbs. (28 - 34 Nm)
Oil return pipe 6 - 7 ft.lbs. (8 - 10 Nm)
Throttle body stay mounting nuts 11 - 16 ft.lbs. (15 - 22 Nm)
Throttle body to surge tank bolts 11 - 16 ft.lbs. (15 - 22 Nm)
Wastegate actuator 7 - 9 ft.lbs. (10 - 13 Nm)
Water pipe "A" mounting bolt 7 - 9 ft.lbs. (10 - 12 Nm)
Water pipe "A" to turbocharger 25 - 36 ft.lbs. (35 - 50 Nm)
Water pipe "B" to turbocharger 25 - 36 ft.lbs. (35 - 50 Nm)
Water pipe "B" to water inlet pipe 29 - 36 ft.lbs. (40 - 50 Nm)

[1] Refer to ADJUSTMENT PROCEDURES.
[2] Not adjustable.