Exhaust Manifold Inspection Procedure

1. Disconnect the O2 sensor connector and set the wire aside.

2. Remove the 7 bolts from the exhaust manifold outer cover.





3. Remove the engine hanger bracket from the exhaust manifold by removing the 2 nuts and 1 bolt.

Note:
Removing the engine hanger bracket exposes more of the exhaust manifold for inspection.





4. Visually inspect the exhaust manifold for cracks.

Note:
The areas highlighted should be examined carefully.

5. If no cracks are visible, reinstall the parts in the reverse order.

Only if cracks are found, proceed with "EXHAUST MANIFOLD REPLACEMENT.