Fast Idle Cam: Adjustments

Fig. 18 Fast idle opening adjustment:

1. On 1987 Mirage, Montero and Pickup, position lever on highest step of fast idle cam. On 1987 Cordia and Tredia and all 1988 models, position lever on second highest step of fast idle cam.
2. On all models, measure primary valve to throttle bore clearance, Fig. 18.
3. On 1987 Cordia and Tredia, clearance should be .043 inch for models with manual transaxle and .048 inch for models with automatic transaxle. On 1988 Cordia and Tredia, clearance should be .023 inch for models with manual transaxle and .026 inch for models with automatic transaxle.
4. On 1987 Mirage, clearance should be .0366 inch for manual transaxle models and .0401 inch for models with automatic transaxle. On 1988 Mirage, clearance should be .023 inch for models with manual transaxle and .024 inch for models with automatic transaxle.
5. On 1987 Montero, clearance should be .0476 inch for models with manual transmission and .052 inch form models with automatic transmission. On 1988 Montero, clearance should be .031 inch form models with manual transmission and .035 inch for models with automatic transmission.
6. On 1987 Pickup with 2.0L engine, clearance should be .0394 inch for models with manual transmission and .0433 inch for models with automatic transmission. On 1987 Pickup with 2.6L engine, clearance should be .0476 inch for models with manual transmission and .052 inch for models with automatic transmission. On 1988 Pickup with 2.0L engine, clearance should be .025 inch for models with manual transmission and .028 inch for models with automatic transmission. On 1988 Pickup with 2.6L engine, clearance should be .031 inch for models with with manual transmission and .035 inch for models with automatic transmission.
7. On Precis, clearance should be .019 inch for models with manual transaxle and .021 inch for models with automatic transaxle.
8. On all models, rotate fast idle adjusting screw as necessary to obtain specified clearance, Fig. 18.