Clutch Pedal Assembly: Service and Repair

35 31 000 Removing And Installing Or Replacing Clutch Pedal







Necessary preliminary work:
- Remove dashboard trim carrier at bottom left







Press plastic pin (1) together and press out.

Release nuts (2) and remove clutch master cylinder.

Clutch hydraulic system remains connected!

Remove retaining clip (3) and remove clutch pedal.

Installation note:
Replace plastic pin.

Replace self-locking nuts.

Tightening torque 21 52 3AZ.


Lightly grease bearing bushes.

Check bearing bushes of clutch pedal and replace if necessary.

Make sure retaining clip (3) is correctly engaged.

Check retaining clip (3) and replace if necessary.