51 21 ... Removing Window Cavity Cover Strip With Special Tool 00 9 324 at Front or Rear

51 21 ... - Removing window cavity cover strip with special tool 00 9 324 at front or rear





Special tools required:






Open complete door window glass.

Front door:

Insert special tool 00 9 324 at front (at A-pillar) in window cavity (1) (letters TOP pointing upwards).

Rear door:

Insert special tool 00 9 324 at rear (at C-pillar) in window cavity (2) (letters TOP pointing upwards).





Note:
For purposes of clarity, picture shows inner door panel and door window glass removed.

Special tool 00 9 324 must be correctly guided under window cavity cover strip (1).

2 - Short leg, bottom
3 - Long leg, top (TOP)





Note:
Start at the front or rear, depending on the model.

Important!
Risk of damage!

Raise window cavity cover strip (3) no more than 5 mm in each levering operation, otherwise the strip will be bent.

Position special tool 00 9 318 on door trim panel (1).

Slide screwdriver (2) into special tool 00 9 324 and lever window cavity cover strip (3) upwards no more than 5 mm.

Guide special tools 00 9 324 and 00 9 318 towards front/rear and lever out window cavity cover strip (3) in the process.