Shifter A/T: Adjustments

24 10 018 Adjusting selector lever (AISIN)







IMPORTANT: An incorrectly adjusted gearshift mechanism can result in tooth meshing noises be transmitted into the passenger compartment.







Necessary preliminary work:
- Remove intake silencer housing.
- Remove intake silencer housing gaiter.
- Move selector lever into "P" position.







Insert the end of the gear selector cable into the locating sleeve (1) of selector lever.
Insert gear selector cable in holder.
Secure gear selector cable with clip to retaining bracket (2).
Move selector lever to "P" position (in anticlockwise direction).







Grip nut (1) and tighten down nut (2).

NOTE: Press against end of gear selector cable shortly before tightening down screw.

Tightening torque 24 11 8AZ.

NOTE: Graphic similar.

׉�: