31 35 021 Replacing Rubber Mounts of Stabilizer Retaining Fixture on Front Axle Carrier

31 35 021 Replacing both rubber mounts for stabilizer mounting on front axle support







Necessary preliminary tasks:
- Remove R55, R56, R57, R58: anti-roll bar.
- R60: Release anti-roll bar at bracket for wishbone.







IMPORTANT: Circo Light must not be used between anti-roll bar and rubber mount.







Remove retaining brackets (1).
Remove rubber mount (2) from stabilizer (2).

Installation note:
Keep anti-roll bar clean and free of oil and grease.
Make sure rubber mount (2) is correctly engaged on locating ring (3).
To install retaining bracket (1), coat rubber mount with Circo Light (sourcing reference: BMW Parts Department).