63 99 002 Replacing Halogen Bulb For High Beam Headlight on Left

63 99 002 Replacing halogen bulb for high beam headlight on left







WARNING: Follow instructions for handling light bulbs (exterior lights).







Unlock retaining tab (1) and remove protective cap (2) from headlight.

Installation note:
Protective cap (2) must be correctly engaged.
Check seal.
Replace protective cap (2), if applicable.
Observe notes regarding replacement of the protective cap.







Release lock (1) and pull halogen bulb for high-beam headlight (2) out of headlight.
Disconnect plug connection (3) and remove halogen bulb for high-beam headlight (2).

Installation note:
Make sure halogen bulb for high-beam headlight (2) is correctly seated.

NOTE bulb type.