61 31 029 Removing and Installing/Replacing Roof Operating Facility

61 31 029 Removing And Installing/Replacing Roof Operating Facility







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESP protection).







Remove trims (1) in direction of arrow.

Installation note:
Retaining lugs must not be damaged.







Unlock retaining lugs (1) with a suitable tool on both sides.
Remove roof operating facility (2) in direction of arrow.

Installation note:
Retaining lugs must not be damaged.







Unlock plug connections (1) and disconnect.
Remove roof operating facility (2).

Installation note:
Make sure roof operating facility (2) is correctly seated.







Replacement:
If necessary, remove bulbs.