51 16 200 Removing and Installing/Replacing Storage Compartment

51 16 200 Removing and installing/replacing storage compartment







Necessary preliminary tasks:
- Remove gearshift lever knob for gearshift lever
- Remove grip for handbrake lever







Version with centre armrest:
Release side screws on covers (1).
Unclip covers (1) in direction of arrow from each other and remove.
Release screw (2).
Unclip drinks holder (3) in upward direction and remove.







Version without centre armrest:
Release screw (1) and remove drinks holder (2).







Unclip gaiter (1) towards top.
Unfasten screws (2).
Release storage compartment (3) at clips (4).
Raise storage compartment (3) slightly and disconnect associated plug connections.
Feed out storage compartment (3) towards top.







Replacement:
- Remove charging socket
- Remove switch block
- Remove controller