51 14 012 Removing and Installing/Replacing Rear MINI Badge

51 14 012 Removing and installing/replacing rear MINI badge

Special tools required:







IMPORTANT: The Instructions on component cementing with double-sided adhesive tape serve as the basis for this repair instruction and must be observed without fail.







Removing badge:
Heat MINI badge (1) with hot air blower and carefully lever out with special tool 00 9 322.







Fitting badge:
Pull liner* off adhesive tape (1), position badge over guide pins (2) on rear lid and press down firmly.
* Liner is the protective film on a new badge.