23 11 222 Replacing Radial Drive Shaft Seal (GS6-53BG/53DG/55BG)

23 11 222 - Replacing radial drive shaft seal (GS6-53BG/53DG/55BG)





Special tools required:
- 23 0 380
- 23 0 490





Note:
After completion of work, check transmission fluid level 00 11 229 Oil Change In Manual Gearbox.

Use only the approved transmission fluid Fluid Type Specifications.

Failure to comply with this requirement will result in serious damage to the manual transmission!





Necessary preliminary tasks:
- Remove transmission
- Remove clutch release bearing Service and Repair.





Release bolts (1) and remove guide tube (2).





Drive a hole into radial shaft seal (1) using a center punch.

Important!
Do not use a drill as drillings may result in transmission malfunction.

Screw in special tool 23 0 490 .

Drive out radial shaft seal (1) with impact weight (2).





Installation:
Coat sealing lips of radial seal with gear oil.

Push radial seal onto special tool 23 0 380 and drive firmly home.