51 14 110 Removing and Installing / Replacing Rear Model Designation (on Right Splitdoor)

51 14 110 - Removing and installing/replacing rear model designation (on right splitdoor)





Important!
The Instructions for number/letter combination cementing 51 14 ... Instructions For Attaching Number/Letter Designation Combination serve as the basis for these repair instructions and must be followed without fail.

Fitting dimensions (R55):





Mark position of model designation with adhesive tape using dimensions (A and B).
A = - 51 mm

B = - 40 mm

Pull liner* off model designation.
Position model designation horizontally on marking and stick on.
*Liner is the protective film on the new model designation