65 77 720 Removing and Installing/Replacing Left B-pillar Sensor

65 77 720 Removing And Installing/Replacing Left/Right B-Pillar Sensor







WARNING:
Comply with airbag safety regulations.
Incorrect handling can activate airbag and cause injury.







Necessary preliminary tasks:
- Disconnect battery negative lead
- Remove rear side trim panel







Release bolt (1).
Remove sensor (2) towards bottom and disconnect associated plug connection.
Tightening torque 65 77 3AZ.

Installation:
Retaining lug (3) must not be damaged.
Make sure sensor (2) is securely seated.