65 83 570 Removing and Installing/Replacing CD Drive For Car Communication Computer

65 83 570 Removing And Installing/Replacing CD Drive For Car Communication Computer

Special tools required:







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary tasks:
- Remove Car Communication Computer







If necessary, cut through warranty seal.
Raise cover (1) with special tool 64 1 020 all round and remove from Car Communication Computer (2).







Release screws (1).
Feed CD drive (2) in direction of arrow out of Car Communication Computer (3) and set down.

Installation:
Ensure correct routing of cables.







Release screws (1).
Remove CD drive trim (2) in direction of arrow from CD drive (3).

Installation:
Ensure correct routing of cables.







Cut through warranty seal (1) at marked point.
Release screw (2).
Lift side cover out of mounting (3) and carefully place to one side.







Disconnect plug connection (1) and remove CD drive.

Installation:
Ensure correct routing of cables.