Oil Pan: Service and Repair

11 13 000 Removing and installing, sealing or replacing oil sump (N14)

Special tools required:
^ 11 4 470
^ 11 9 581
^ 11 9 582

Necessary preliminary tasks:
^ Drain engine oil.

Release oil sump bolts in area of line (1).
Tighten Oil sump to crankcase
2AZ Oil sump to crankcase
M6x16 12 Nm





Release screw (1) over exhaust manifold with special tools 11 9 582 and 11 9 581.





Clean sealing face (1) with special tool 11 4 470.





Important:
Do not use adhesive sealing bead.

Remove protruding or sticking-out sealing beads (1) with a sharp knife.

Installation:
Do not use liquid seal.
A metal substrate gasket is available for repairs.





Assemble engine.