33 31 000 Removing and Installing Complete Rear Axle Support

33 31 000 Removing and installing complete rear axle support







WARNING:
Danger of injury.
Failure to comply with the following instructions may result in the vehicle slipping off the vehicle hoist and critically injuring other persons.
Load the luggage compartment with a minimum of 100 kg before lowering/removing the rear axle support.
When supporting components, make sure that:
- the vehicle can no longer be raised or lowered
- the vehicle does not lift off the locating plates on the vehicle hoist.







IMPORTANT:
Observe safety information for raising the vehicle
In order to avoid damage to vehicle hoist, perform weight compensation on vehicle.







Necessary preliminary tasks:
- Remove pulse generator.








NOTE: The subsequent procedure is described in the document "Lowering/raising rear axle support".







IMPORTANT:
- Prior to installation, check sensor head and cable on pulse sensor and renew if necessary.