72 11 097 Removing and Installing/Replacing Rear Centre Lower Strap Fitting
72 11 097 Removing And Installing/Replacing Rear Left Or Right Lower Strap
Necessary preliminary work:
- Remove rear seat
Installation note:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 minutes (start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use
Remove cover (1) in direction of arrow.
Installation note:
Retaining lugs on cover must not be damaged.
Replace cover if necessary.
Release screw (1).
Tightening torque 72 11 08AZ.
Remove lower strap fitting (2).
Installation note:
Replace screw (1).
Lower strap is encoded against incorrect assembly (2).