Wiring Harness: Tools and Equipment

61 13 ... Special Tools For Wiring Harness Repairs

Special tools required:







Repair range, vehicle electrical system:
Single parts for wiring harness repairs*

* Sourcing reference: BMW Parts Department

NOTE: Refer to Service Information: SI 2 04 07 341







Release and press-out tool:
- Special tool 61 0 300
- Special tool 61 0 400 (MINI N12/N14)
- Special tool 61 1 100 (engine)

Handling:
- Instructions for opening contacts and locks of different plug contact systems







Cutting to length and stripping insulation from cables:
Wire stripper MultiStrip 10*

*Sourcing reference BMW Workshop Equipment Catalogue

Handling:
- Cutting cables to length and strip insulation







Crimping stop parts (small contacts) and butt connectors:
- Special tool 61 4 320
1. Tool without crimping head
2. Crimping head (stripping insulation and cutting fibre-optic cables to length)
3. Crimping head (crimping fibre-optic cable contacts)
4. Crimping head (crimping MQS contacts)
5. Crimping head (crimping MPQ contacts)
6. Replacement blade (face-cutting fibre-optic cables)
7. Replacement blade with tool (insulation stripping unit)
8. Universal crimping head (SI 2 04 06 293)







Crimping stop parts (large contacts) and butt connectors:
- Special tool 61 0 200 (crimping set)
- Special tool 61 0 210 (matrix set SLK8)
- Special tool 61 0 220 (matrix set SLK2.8)
- Special tool 6J_0 230( matrix set MAK 8 / DFK4)
- Special tool 61 0 240 (butt connector 4.0 - 6.0 mm2)

Handling:
- Refer to Service Information:
SI 2 02 05 194
SI 2 07 05 233