Cell Phone - Phonebook Doesn't Transfer To The Vehicle
SI M84 01 13Communication Systems
February 2013
Technical Service
SUBJECT
Telephone: Phonebook Does Not Transfer to the Vehicle
MODEL
R55
R56
R57
R58
R59
R60
Equipped with option 606/6UM, Navigation OR option 7L5, MINI Connected with Navigation
Produced from March 1, 2010 to June 30, 2012
SITUATION
The telephone book does not transfer to the vehicle afier the pairing process is completed. Software error in the head unit
PROCEDURE
Do not replace parts!
A software solution will be released in ISTA/P 2.49.1, expected in March 2013.
Until the release of ISTA/P 2.49.1, perform the following steps:
1. Duplicate and verify the issue.
2. Verify the phone is listed as a recommended device on
miniusa.com/bluetooth
3. Test the phonebook transfer by pairing a known good recommended phone to the vehicle.
4. If the phone book is transferred successfully, do not perform the remaining steps below.
5. If the phonebook fails to transfer or does not completely transfer, proceed with the steps below.
6. Perform a vehicle test and complete all Bluetooth-related test plans linked to stored fault codes. Note: When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery voltage reading in the repair order comments section.
7. Retest the functionality and verify the phonebook transfers to the vehicle.
8. If the phonebook still does not transfer, proceed with the steps below:
^ Submit a PuMA case to Technical Service for further assistance.
^ Set the PuMA case subject as: "Phonebook does not transfer." Once ISTA/P 2.49.1 is released, this Service Information bulletin will be updated.
WARRANTY INFORMATION
Covered under the terms of the MINI New Passenger Car Limited Warranty.
Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead.
Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of the last 7 digits of the Vehicle Identification Number (VIN). Click on the "Search" button, and then enter the applicable flat rate labor operation in the FR code field.
Even though work time labor operation code 65 99 000 ends in "000," it is not considered a Main labor operation.
Work time (WT) labor operation 65 99 000 requires an individual punch time
If a control module fails to program correctly or initializations are required, the additional work must be claimed with separate labor operations under the applicable defect code listed above; refer to KSD2.
Other Repairs
If performing other ISTA diagnostics and the related test plans results with eligible and covered work, claim this work with the applicable defect code and labor operations listed in KSD2.
Note:
Please follow any TeileClearing (TC) or Diagcode (DC) requirements that may apply to this additional work.