2BCC

2BCC - P060A

Information saved in
DME

Fault code
2BCC - P060A

Fault text
DME, internal fault

Fault description
DME, internal fault

Condition for fault identification
Test condition:
none
Terminal condition: Terminal 15
Voltage condition:
none

Condition for fault memory entry
none

Action in service
1. Clear fault memory
2. Allow vehicle to completely enter sleep mode
3. Ignition on
4. If fault is still present, replace DME

Fault effect and breakdown warning
None
The driver circuit chips are enabled at fault counter readings
between 0 and 4. Once the fault counter reaches or exceeds
5, the driver circuit chips are disabled, causing the engine to
stop.

Driver information
Warning light:
MIL ON
EML ON (CC message: ID29)

Service instruction
None