Campaign - Incorrect SCC (Steering Column Cluster)
SI M62 01 11Instruments
July 2011
Technical Service
PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS.
SUBJECT
Service Action: Incorrect SCC (Steering Column Cluster)
MODEL
R55 LCI (Cooper Clubman, Cooper S Clubman)
Vehicles equipped with option 07KL (Hampton Package)
SITUATION
An incorrect symbol for the parking brake and brake system indicator was installed in the SCC (tachometer/rev counter).
CAUSE
Incorrect hardware installed.
AFFECTED VEHICLES
In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar label for code number 47. If code number 47 has been punched out, the campaign has already been performed. If code number 47 has not been punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the response of the system, either proceed with the corrective action or take no further action.
CORRECTION
Replace the SCC. Refer to the ISTA (Integrated Service Technical Application) repair instructions. Program the vehicle using ISTA/P P2.41.4 or later.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
PARTS INFORMATION
LABEL INSTRUCTIONS
This Service Action has been assigned code number 47. After the vehicle has been checked and/or corrected, obtain a label (MD20-040) and:
A. Emboss your BMW center warranty number in the middle of the label (1):
B. Punch out code number 47 (2), printed on the label; and
C. Affix the label to the B-pillar as shown.
Covered under the terms of the MINI New Passenger Car Limited Warranty.
WARRANTY INFORMATION