P15A2

2F63 - P15A2

Information saved in
DME

Fault code
2F63 - P15A2

Fault text
Oil-pressure control valve, mechanical:

Fault description
Oil-pressure control valve, mechanical

Condition for fault identification
Test condition:
The error is recognized when the oil pressure remains at
maximum level despite targeted application of voltage to the
solenoid valve.
Terminal condition: Terminal 15
Voltage condition:
Voltage in onboard electrical system >10V

Condition for fault memory entry
none

Action in service
1. If the oil level is below the minimum, simply replenish
the oil and road test the vehicle
2. If the oil level is correct or the issue continues to appear
following the oil change (refer to Item 1) replace the oil-
pressure control valve + oil change
3. If the problem still occurs, replace the entire pump
assembly (pump + valve)

Fault effect and breakdown warning
None
Best case scenario:
None
Worst case scenario:
Slight increase in fuel consumption
Possible noise generation (oil pump whines)

Driver information
Warning light:
none

Service instruction
None