P10D5

2F15 - P10D5

Information saved in
DME

Fault code
2F15 - P10D5

Fault text
Coolant temperature sensor, plausibility

Fault description
Coolant temperature sensor, plausibility

Condition for fault identification
Test condition:
Cold start
Terminal condition: Terminal 15
Voltage condition:
Onboard electrical system voltage between 10.8 V and 17 V

Condition for fault memory entry
none

Action in service
1. Inspect to determine whether a coolant preheater (block
heater or auxiliary heater) is installed
2. Check wiring harness between DME and sensor
3. Replace sensor
4. Replace DME

Fault effect and breakdown warning
None
Engine runs roughly, possible subsequent power reduction
from heat management

Driver information
Warning light:
MIL ON (US only)

Service instruction
None