P0342

2983 - P0342

Information saved in
DME

Fault code
2983 - P0342

Fault text
Intake camshaft sensor

Fault description
Intake camshaft sensor

Condition for fault identification
Test condition:
Engine running
Terminal condition: Terminal 15
Voltage condition:
none

Condition for fault memory entry
4 crankshaft revolutions

Action in service
1. Check signal wire for short to ground. (ignition off)
2. Check sensor voltage supply (4.5 to 5.5 V) (ignition on)
3. Check plug-in contacts (intermittent open)
4. Check sensor installation (gap to reluctor is too
large/small, specification is 0.1 to 2.0 mm)
5. Replace sensor

Fault effect and breakdown warning
The engine reverts to its emergency limp-home program,
continued vehicle operation is possible, because power is
reduced the driver should refrain from passing maneuvers.
Long starting periods, loss of power

Driver information
Warning light:
MIL ON

Service instruction
None