P0336

296E - P0336

Information saved in
DME

Fault code
296E - P0336

Fault text
Crankshaft sensor

Fault description
Crankshaft sensor

Condition for fault identification
Test condition:
Sensor supply voltage 4.8 .. 5.2 V
engine speed > 400 rpm
Terminal condition: Terminal 15
Voltage condition:
DME operating range

Condition for fault memory entry
200
malfunctions

Action in service
1. Check wiring at plug
2. Check plug-in contacts (intermittent open)
3. Inspect the sensor's installation (excessive/inadequate gap
relative to the reluctor ring, loose bolt)
4. Check reluctor ring for contamination and damage (bent
teeth)
5. Replace sensor

Fault effect and breakdown warning
Engine stalls, or continued vehicle operation is possible
although passing maneuvers should be avoided owing to the
reduced power.
Engine stalls, breakdown vehicle

Driver information
Warning light:
MIL ON

Service instruction
A terminal status switch must be conducted before this fault
can be deleted.