P0014

283D - P0014

Information saved in
DME

Fault code
283D - P0014

Fault text
VANOS, exhaust: Adaptation, limit position

Fault description
VANOS, exhaust: Adaptation limit

Condition for fault identification
Test condition:
VANOS adaptation finished -> Overrun phase, engine speed
> 2000 for 4 sec.
Terminal condition: Terminal 15
Voltage condition:
none

Condition for fault memory entry
none

Action in service
1. Check valve timing (vsa_sprs zu vsa_spri)
2. Check chain length/tension
3. Perform system test with tester
4. Check reluctor position
5. Inspect VANOS valve for contamination
Mutual position switch of camshaft solenoid valves
If this is successful: Replace exhaust-side solenoid valve
6. No improvement after 5.: Switch positions of VANOS
units. If this is successful: Replace exhaust-side VANOS
unit

Fault effect and breakdown warning
None
none

Driver information
Warning light:
MIL ON

Service instruction
None