2AD6

2AD6 - P013E

Information saved in
DME

Fault code
2AD6 - P013E

Fault text
Oxygen sensor after catalytic converter, in coasting/overrun
mode

Fault description
The diagnostic function monitors the voltage of the signal
from the post-catalyst oxygen sensor during overrun
operation.

Condition for fault identification
Test condition:
The error is recognized when the voltage exceeds 0.15 V
during operation on overrun/trailing throttle.
Terminal condition: Terminal 15
Voltage condition:
Battery voltage > 10.7 V

Condition for fault memory entry
none

Action in service
1. Inspect wiring harness between oxygen sensor and DME
2. Replace oxygen sensor

Fault effect and breakdown warning
None
none

Driver information
Warning light:
MIL ON (US only)

Service instruction
None