Manufacturer Code Charts: 2863

2863 - P1062

Information saved in
DME

Fault code
2863 - P1062

Fault text
Valvetronic, power limitation

Fault description
Valvetronic, power limitation

Condition for fault identification
Test condition:
Engine running;
Valvetronic limp-home mode
At least one Valvetronic sensor signal must be present
Maximum valve stroke
Terminal condition: Terminal 15
Voltage condition:
none

Condition for fault memory entry
3 sec.

Action in service
1. If other Valvetronic faults are present, then this is a
collateral error
2. Check the Valvetronic mechanism

Fault effect and breakdown warning
None
none

Driver information
Warning light:
MIL ON
EML ON (CC message: ID29)

Service instruction
None