72 11 092 Removing and Installing/Replacing Rear Left or Right Seat Belts

72 11 092 Removing And Installing/Replacing Left Or Right Seat Belt In Rear Cabin







Necessary preliminary tasks:
- Remove rear seat
- Remove belt outlet trim
- Remove striker
- Remove roll-over protection system







Installation note:
- Powerlock screws (Duo Taptite) must be replaced and must not be reused
- Powerlock screws (Duo Taptite) are mechanical thread fasteners with trilobular threads







Release screw (1).
Tightening torque 72 11 7AZ.
Remove end fitting (2) with seat belt.







Release screw (1).
Tightening torque 52 26 04AZ.
Remove striker (2).







Release screw (1).
Tightening torque 72 11 13AZ.
Release screw (2).
Tightening torque 72 11 14AZ.
Remove deflection fitting.







Release screw (1).
Tightening torque 72 11 5AZ.
Remove automatic reel (2).

Installation note:
Automatic reel (2) is encoded against incorrect installation.

 [5�I[5: