Spoiler: Service and Repair

51 71 412 Removing And Installing/Replacing Rear Spoiler

Special tools required:
- 51 0 300







Lever out seal plugs (1) and release nuts underneath.

Tightening torque

7AZ Rear spoiler to rear lid 4 Nm.
Type: R56







Detach rear spoiler (1) in upward direction from clips (2).







Installation:
If necessary, replace faulty clips (1).
Studs (2) and seals (3) must not be damaged.







Replacement:
Clean adhesive area (1) on rear spoiler (2) with spirit.
Air drying time at least 1 minute.
Stick cover (3) to adhesive area (2) and press down with special tool 51 0 300 (hand roller).